| |
Outdoor Wireless Access Point or Repeater |
|
| |
|
|
|
|
The NP730 is an outdoor device
that will operate in access point, repeater and bridge mode. Designed to
meet the needs of today's most demanding wireless LAN deployments, the
NP730 offers a 5DBI antenna with a 200mw inbuilt booster to enhance
wireless network coverage. The NP730 offers a solution to create a
reliable and scalable wireless network through its multi mode set up the
device can be used in many instances to increase and enhance wireless
coverage.
Operating in the 802.11g
wireless spectrum the device provides 54mpbs wireless coverage and is
backwards compatible to 802.11b. Whether you are needing to increase
wireless connectivity within an office, warehouse, shop or to extend the
range on the HS960 wireless hotspot or if you are looking to
increase outdoor coverage, each external access point offers simple
installation and a simple way to increase your coverage.
|
How far does the
wireless signal reach?
Coverage:
Up to 465 square metres
Transmission Power: 18 dBm Maximum (user
adjustable)
Ideally, wireless internet
signals work best in an open line-of-sight environment over
distances under 50m.
The exact range of the signal at
your site will depend on several factors, including the power output
of the hotspot device you choose, the receiver strength of the
customer's laptop device, and then obstructions such as buildings,
trees, walls, water features which may be in the way of your
transmitting path.
We can assist with additional
external antennae to extend the range or improve the strength of
your signal. |
|
Connecting your NP730:
1. Attach the included Antenna to the antenna port on
the NP730 unit
2. Connect the 25 meters RJ45 cable to the NP730 and
the other end to the ODU port on the DC injector
3. Connect the included 2 meters RJ45 cable to the RJ45
port on the DC injector and to your hotspot, router, switch or computer
(only required for the first NP730, the others can be repeaters)
4. Connect the included 12V DC PSU to the DC 12V port
on the DC injector
5. Log into the device and configure the settings as
you require
|
Features:
- Wireless data rates up to 54Mbps
- Access point mode, client mode, bridge mode or repeater mode
- Supports 100 Simultaneous Users
- 64/128-bit WEP encryption
- WPA encryption
|
Equipment Included:
- NP730 Access Point
- 5dbi detachable antenna
- 25 metres of RJ45 network cable
- 2 m RJ45 cable
- Mounting bracket
- DC Injector
- CD with software and manual
|
|
The box containing the equipment is 35cm x 10cm x
26cm
Screen Shots
Here are some screen shots from the
device's configuration screens:
Add a 12 dBi dipole array antenna
for better signal distance
Warranty &
Support
The NP730 is covered by the Netcomm
manufacturer's standard warranty.
|
|
|
|
|
|
|
|
|
21% of home owners who have a laptop and wireless internet have surfed the internet while on the toilet 
